General Treatment

Fillings

The concept of a “filling” is replacing and restoring your tooth structure that is damaged due to decay or fracture with a material. We will replace old, broken-down amalgam/metal fillings that contain traces of mercury with white fillings (composites) to restore your smile and teeth to a more natural look and feel.

With today’s advancements, no longer will you have to suffer the embarrassment of unsightly and unhealthy silver/mercury fillings or metal margins of the past. Eliminate the dark, black appearance in your teeth with new-age, state-of-the-art, tooth-colored resin or porcelain materials.

Root Canals

A root canal is a procedure that extracts decayed pulp from the central part of the tooth, reshapes the canal and replaces it with strengthening filler.

A cavity is the result of superficial decay of the enamel of the tooth. Left long enough, this decay can burrow into the deeper reaches of the tooth, causing extensive damage to tooth structure. When the damage goes beyond what can be treated with a filling, dentists can perform a root canal (or endodontics), preserving the tooth and retaining its original integrity; thereby, saving a tooth that in the past would have to have been pulled.

This procedure involves:The patient undergoes anesthesia.

• A dental dam is used to isolate the tooth.
• The tooth is opened to allow for removal of infected or dead dental pulp.
• The tooth is comprehensively cleaned, including any cracks and canals.
• With special tools, the doctor reshapes the canals.
• The tooth is filled again with cutting edge biocompatible filling material.
• A temporary covering is used to cover the access opening.
• Patients must see their regular dentist quickly for a permanent restoration of the tooth.

Tooth Extractions

General Extractions
An extraction is the complete removal of a tooth. Extractions are sometimes necessary if a primary tooth is preventing the normal eruption of a permanent tooth, if the tooth has suffered extensive tooth decay or trauma that cannot be repaired, if the patient has gum disease, or if the tooth is impacted (usually the wisdom teeth). Depending on the complexity of the case, an extraction can be performed surgically or non-surgically. A mild anesthesia is used to ensure your child is as comfortable as possible throughout the procedure.

Wisdom Teeth
Your third molars are more commonly called “wisdom teeth.” Usually appearing in the late teens or early twenties, third molars often lack the proper space in the jaw to erupt fully or even at all. This common condition is called impaction. When any tooth lacks the space to come through or simply develops in the wrong place of your jaw and becomes impacted, problems can arise. Primarily, damage to adjacent teeth and crowding occur.

In certain cases, the wisdom tooth that cannot come through becomes inflamed under the gums and in the jawbone, causing a sac to develop around the root of the tooth that then fills with liquid. This can cause a cyst or an abscess if it becomes infected. If either of these situations goes untreated, serious damage to the underlying bone and surrounding teeth and tissues can result.

To potentially stave off this result, an extraction of one, several or all of the wisdom teeth may be advised. If that is the case, we have the equipment and training needed to perform such extractions, with an absolute minimum of discomfort. Ask our staff for more information regarding tooth extractions if you feel you may need one.

Crowns and Bridges

Crowns
A crown is a permanent covering that fits over an original tooth that is either decayed, damaged or cracked. Crowns are made of a variety of different materials such as porcelain, gold, acrylic resin or a mix of these materials. Porcelain generally has the most natural appearance, although it is often less durable.

The treatment plan for a patient receiving a crown involves:

1. Numbing the tooth to remove the decay in or around it.
2. Re-sculpturing the tooth to provide an ideal fit for the crown.
3. Making an impression of your teeth in order to create a custom-made crown (usually takes one to two weeks).
4. Making a temporary crown out of acrylic resin and fitting it onto the tooth during the interim period when the permanent custom-made crown is being created.
5. Applying the permanent crown (when received from the lab) by removing the temporary crown and fitting the permanent one onto the tooth.
6. After ensuring that the crown has the proper look and fit, the dentist cements it into place.

This process generally consists of a minimum of two to three visits over a three to four week period. Once the procedure is completed, proper dental hygiene, including daily brushing and flossing, is required to maintain healthy, bacteria-free teeth, gums and crowns. This helps in the prevention of gum disease. Given proper care, your crowns can last a lifetime.

Bridges
A bridge is a dental device that fills a space that a tooth previously occupied. A bridge may be necessary to prevent:

• Shifting of the teeth that can lead to bite problems (occlusion) and/or jaw problems and resultant periodontal disease.
• Bridges safeguard the integrity of existing teeth and help maintain a healthy, vibrant smile.

There are three main types of bridges, namely:

• A fixed bridge is the most popular and consists of a filler tooth that is attached to two crowns, which fit over the existing teeth and hold the bridge in place.
• The “Maryland” bridge is commonly used to replace missing front teeth and consists of a filler that is attached to metal bands that are bonded to the abutment teeth. The metal bands consist of a white-colored composite resin that matches existing tooth color.
• The cantilever bridge is often used when there are teeth on only one side of the span. A typical three-unit cantilever bridge consists of two crowned teeth positioned next to each other on the same side of the missing tooth space. The filler tooth is then connected to the two crowned teeth, which extend into the missing tooth space or end.

Dental Implants

Dental implants are artificial tooth replacements that were first developed half a century ago by a Swedish scientist named Per-Ingvar Branemark. Implants arose from the patient’s need to secure loose-fitting dentures. Since the advent of the implant, engineering and enhancements to the implant have enabled dentists to expand the implant’s usefulness, including the replacement of missing or lost teeth. Today, implant techniques provide a wide range of tooth replacement solutions including:

• Single Tooth Replacement
• Anterior Replacement
• Posterior Replacement
• Full Upper Replacement

If the missing tooth space has no surrounding teeth, the dentist may decide an implant is the most appropriate treatment choice or option.

Post Implant Care

Although proper oral hygiene is always recommended for maintaining good dental health, it is especially important when a patient has received a dental implant. Bacteria can attack sensitive areas in the mouth when teeth and gums are not properly cleaned, thus causing gums to swell and jaw bones to gradually recede. Recession of the jawbone will weaken implants and eventually make it necessary for the implant to be removed. Patients are advised to visit their dentists at least twice a year to ensure the health of their teeth and implants. Dental implants can last for decades when given proper care.

Veneers

Veneers are thin, semi-translucent “shells” typically attached to your front teeth. Veneers are customized from porcelain material and permanently bonded to your teeth. Veneers are a great alternative to otherwise painful dental procedures to improve the appearance of your smile.

Common problems that veneers are used for:

• Spaces between the teeth
• Broken or chipped teeth
• Unsightly, stained or discolored teeth
• Permanently stained or discolored teeth
• Crooked or misshapen teeth

Veneers are a great aesthetic solution to your smile that may even help you avoid orthodontic treatment. Subtle changes to your smile can be achieved with veneers, and in most cases, veneer application is completed in only two office visits.

Please contact our office if you have any further questions on veneers.

Composite Bonding

Bonding is a common solution for:

• Fixing or repairing chipped or cracked teeth
• Reducing unsightly gaps or spaces between teeth
• Hiding discoloration or faded areas on the tooth’s surface

Often, composite boding is used to improve the appearance of your teeth and enhance your smile. As the name indicates, composite material, either a plastic or resin, is bonded to an existing tooth. Unlike veneers or crowns, composite bonding removes little, if any, of the original tooth.

Composite bonding has many advantages:

• It is a quick process, which typically lasts less than one hour.
• It does not reduce the tooth’s original structure and is relatively inexpensive.
• Composite resins come in many different shades and provide better matching of shades to the natural color of your teeth.
• Composite bonds, however, are not as durable and long-lasting as veneers and crowns and may need to be re-touched or replaced in the future.
• Composite bonds stain more easily and therefore require proper care and regular cleaning. In order to ensure the longest possible duration of the bonding, composites should be brushed and flossed daily. Common staining elements include coffee, tea, tobacco, foods and candy.

Nite White

We proudly offer Nite White take-home whitening system by Discus Dental.

There are many causes for tooth discoloration, but most patients can benefit from tooth whitening. If your teeth are healthy and unrestored, these products from Discus Dental may be an ideal option for you.

Much like the Day White system, the Nite White system can whiten you teeth at your convenience. Generally, patients will wear the custom-fitted tray with the Nite White gel while they sleep or for a few hours during the day. Patients will start seeing results after the first night of wear and will see continued results in the next 10-14 days while continuing with the process. The active ingredient, carbamide peroxide, is proven to be safe for teeth and gums while successfully whitening your smile.

Air Abrasion

Many patients’ fear of the dentist stems from the drill used to treat tooth decay. In our office, we use the gentle process known as air abrasion. This decay-removing process is virtually pain-free as the dentist can control the speed of the spray of air/powder mix as well as the intensity. There is generally no need for shots with this new technology. It’s also free of the noise and vibration associated with the old drill.

When the decay is removed, the dentist places a white filling that is barely noticeable! The process allows us to treat the decay immediately and restore your tooth before more damage can be done. Air abrasion can also repair fractured teeth, old fillings, sealants or broken restorations.

Laser Cavity Detection

Did you know that half of the cavities found in your teeth could go undetected by current diagnostic techniques? However, our office now offers a new diagnostic method that can more accurately define caries in teeth.

We offer a unique service that can detect caries at the earliest stage. Our laser cavities detector is over 90 percent accurate in detecting even the smallest lesions that don’t even appear on X-rays! Early detection enables us to better preserve and protect your teeth.

The laser cavities detector boasts a high patient acceptance and satisfaction with its quick, simple and painless nature.